2018 AXPONA, April 13, 2018 — At Pass Labs we don’t change our products unless we feel that the changes are significant improvements over previous versions. Because of this our typical product life spans are eight to ten years.
We are constantly working on and listening to new things and increasing our knowledge of circuits and components on sound. Eventually we find some things worth putting into production because they are significant enough. That time has come with a new series of preamplifiers.
XP-22 Preamplifier
Replacing the XP-20 Preamplifier that was introduced in 2008, the new XP-22 uses double shielded, low-noise toroidal transformers in an external supply connected via aviation-grade circular connectors using silver over oxygen-free copper. The power supply is dual mono, with two transformers offering lower radiated and mechanical noise. Noise is the most prominent part of THD+N at low levels, so by lowering noise we get better resolution and dynamics.
The gain circuitry continues to use our favorite transistors from Toshiba but has a larger, higher-biased, output stage like the Xs Preamp, and includes auto bias. The larger output stage makes longer, and multiple cable runs easier to drive and gives us the advantage of simplifying our single-ended output circuitry while increasing performance.
The volume control is a single stage instead of two stages and has more range; it is quieter and more accurate. This is the same volume control as used in the XP-30.
Overall this makes for a quieter, more neutral, musical and versatile control center for your system. Suggested Retail Price: $9,500.
The XP-22 measures spectacularly well — but it really stands out sonically.
XP-27 Phono Preamplifier
The twin-chassis XP-27 Phono Preamp eclipses the already exceptional performance of the well-reviewed and well-received XP-15, XP-25 (introduced in 2010) & XP-17: delivering enhanced RIAA performance at a fraction of the previous distortion.
The new design uses double-shielded, low-noise toroidal transformers in an external supply, connected via aviation-grade circular connectors using silver over oxygen-free copper. The power supply is dual mono with two transformers with lower radiated and mechanical noise. Noise is the most prominent part of THD+N at low levels, so by lowering noise we get better resolution and dynamics.
The XP-27 input and gain circuitry are similar to that found in the Xs Phono. This means switching and loading is done at higher signal levels, minimizing noise and improving low level performance.
Suggested Retail Price: $11,500.
(XP-27 specifications at the very end.)
XP-22 Specifications:
Power consumption 40 watts
Gain
Output Impedance: 25 Ohms RCA, 50 Ohms XLR
Input Impedance: 22K Ohms
Frequency response: +/- 0.05 dB 10Hz to 20KHz
-2dB @ 150KHz
Crosstalk > 100dB
THD
Max out 33V RMS 0.1%
Residual Noise 2uV RMS, SN -125dB ref max out
Dimensions: 17”w x 12.5”d x 4”h each chassis
Weight: 55LBS
• • • • • • • • • • • •
XP-27 Specifications:
Gain
RIAA response +/- 0.1 dB 20-20KHz
Distortion
Max out 22V RMS
Output Impedance: 200 ohms
Input Impedance: 100pF – 750pF on any input
Unweighted Noise -93 dB ref 10mV (MM)
Power consumption 50 watts
Dimensions: 17”w x 12.5”d x 4”h each chassis
Weight: 55LBS